South Texas Banshee🤙🏽🤙🏽 Banshee/Blaster Leakdown Kit, 26-35mm Kit

Description

•
fits blaster and banshee 26,28,33&35mm Intakes.
Here Is a link to see the tester in use, copy and past to your browser.
https://youtu.be/m0YgDVlDW9A
*see reviews in the last three pictures*
This leak down tester will work on all Yamaha Banshees with stock
26mm
carbs as well
28mm
carbs.
Can be used in or out of the frame. To keep from damaging seals,use a bicycle pump to add air pressure to
7 psi
instead of shop air. .
Directions: If you know how to pull and re Install carbs, I'll go from there.
1) remove expansion chambers,place rubber caps over exhaust ports and clamp tight.
2) remove carbs and place leak tester in one intake and block off plug in the other intake, tighten intake boot clamps.
3) pressurize engine to 7psi using a bicycle hand pump. If you use shop air it MUST be regulated to 6psi max. If not, you can/will destroy the seal/gaskets.
4) disconnect air from valve stem and watch for a pressure drop. If pressure doesn't hold, use soapy water in a spray bottle and start checking mating surfaces like, jug to case, head to jug, where cases meet, intake boots, reed gaskets, etc. If no leak can be detected and you've sprayed the entire engine, the leak will be a crank seal.
I have taken the time to post a video on how to use these leak testers on my channel for you guys. There is another seller on E-bay under cutting my prices,
he is not going to take the time to help you with tech help like i will. Also some of the information in his desription is wrong. HE IS MISLEADING YOU!!!
If you appreciate my time, help and videos, please support me in buying MY product.
Search this text in Youtube to find the video as i am not allowed to post external links here. Thanks you and have a good day.
search in youtube
4 mil stroker video #11 Ebay leakdown tester instructions and use. link to buy in description.