BajaRon's Can-Am Ryker 900 & Rally Spark Plug Kit 2019-2021 NGK Iridium CR8EIX

Description

BRP Can-Am Spyder Bajaron Custom Performance Spark Plug Set 2014 2015 2016 2017 2018 RT (All Models) 2015 2016 2017 2018 F3 (All Models) NGK MR7BI-8 90982 Laser Welded Iridium Thermal Paste Dielectric Grease
~ Will Ship Worldwide! ~
BajaRon's Custom Performance Spark Plug / Ignition Kit
Includes
Dielectric Grease
and
Thermal Paste
Everything Needed for your Spark Plug Service/Replacement
Better Performance!
A Smaller Center Electrode Gives a Better, More Efficient Path for the Electrical Charge to Jump the Gap - Resulting in Better Ignition of the Fuel Charge
Lasts 60% Longer than OEM Spark Plugs
*******
BajaRon's
Custom Performance Spark Plug Kit
Ebay's Vehicle Application List is Not Always up to date. This Spark Plug Service Kit will fit all Can-Am Ryker 900 Models for 2019, 2020 and 2021 - Guaranteed!
Will Fit the Following Can-Am Ryker Models and Years
2019-2021 Ryker 900
2019-2021 Ryker 900 Rally
Designed Specifically for the 900 ACE Motor
Will Not
fit any Can-Am Spyder Models
********
NGK Iridium IX - The Ultimate Performance Spark Plug
NGK's
Iridium IX
Series Spark Plugs were Designed Specifically for the Performance Enthusiast. If you want to get Quicker Starts, Better Throttle Response, and a modest Increase in Power and Fuel Mileage over the OEM spark plug. This is the Spark Plug for you!
Fine Wire
Iridium Tip ensures high durability and a consistently
stable spark
Outstanding Acceleration, Fuel Efficiency and Durability
Iridium
Alloy has an Extremely High Melting Point, Perfect for Today's High-Tech, High Performance Engines
Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
Corrugated Ribs Prevent
Flashover
Pure Alumina Silicate Ceramic
Insulator
, Provides Superior Strength and Better Heat Transfer
Ultimate Design, Technology and Performance
Triple Seals Prevent Leakage
The Can-Am Rotax 900 ACE motor comes from the factory with NGK Laser Welded Spark Plugs. The OEM Laser Welded version is a good OEM spark plug. However, the NGK Iridium IX spark plugs offered in this kit are a step above. The CR8EIX Iridium IX Spark Plugs contained in this kit are a perfect match for the Rotax 900 motor, and will out-perform the OEM Laser Welded version.
~ This Spark Plug Upgrade WILL NOT affect your Warranty ~
You will Receive
(3)
NGK CR8EIX Iridium IX Spark Plugs
(Pre-Gapped)
(1)- Packet SuperLube High Quality Dielectric Grease
(1)- Packet GD-100 High Temperature Thermal Paste
(1)- Instruction Sheet
(Not Pictured)
Both the
Dielectric Grease
and
Thermal Paste
are very important components of a properly done Spark Plug service.
Dielectric Grease
- Applying a high quality Dielectric grease to the inside of the spark plug boot does several things. It lubricates the boot to spark plug interface, prevents water/moisture from getting to the electrical connection, inhibits corrosion, and protects against the boot 'welding' to the spark plug over time.
Thermal Paste
- Note: Not all Thermal pastes are created equal. I supply a High Temperature Thermal Paste with this kit. Typical computer type thermal paste will not stand up to the temperatures created by an internal combustion engine.
Applying a thin coat of thermal paste to the spark plug threads insures good heat transfer from the spark plug to the cylinder head.
DO NOT USE Anti-Seize!
Anti-Seize is an insulator and will inhibit the heat transfer critical to correct functioning of your spark plugs!
The spark plug depends on the enhanced heat transfer provided by a good Thermal Paste to maintain proper temperature of the spark plug components. This is very important to prevent damaging and power robbing pre-ignition (Knock) and fouling.
It is true that the computer in your Can-Am Ryker will manage ignition timing to prevent pre-ignition so you do not have to worry about any damaging effects. So if your spark plugs get too hot, the computer will retard ignition timing to compensate for the overheating spark plugs. However, this will reduce power output and fuel mileage. That is why BRP (and other modern engine manufacturers) highly recommend using thermal paste on the spark plug threads to prevent this. Using 91 or higher Octane Fuel will also reduce the chance that your on-board computer will have to compensate by retarding ignition, which reduces power and fuel mileage.
* * * * * * * *
Worldwide Shipping
Our Goal is Customer Satisfaction
Thank you for Looking and have a Great Day!